Users Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

351

352

353

354

355

356

357

358

359

360

Command Modes ROUTER BGP

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

7.7.1.0 Introduced on the C-Series.

neighbor allowas-in

Set the number of times an AS number can occur in the AS path.

C9000 Series

Syntax

neighbor {ip-address | peer-group-name} allowas-in number

To return to the default value, use the no neighbor {ip-address | peer-group-name}

allowas-in command.

Parameters

ip-address

(OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.

peer-group-name

Enter the name of the peer group to set the advertisement interval for all routers in

the peer group.

number

Enter a number of times to allow this neighbor ID to use the AS path. The range is

from 1 to 10.

Defaults Not configured.