Users Guide

dampening Enter the keyword dampening to view BGP dampening.
events Enter the keyword events to view BGP protocol events.
ipv4 Enter the ipv4 IP address to view the IPV4 route information.
ipv6 Enter the ipv6 IP address to view the IPV6 route information.
keepalives Enter the keyword keepalives to view BGP keepalives.
notifications Enter the keyword notifications to view BGP notifications.
soft-
reconfiguration
Enter the keywords soft-reconfiguration to view only information on
inbound BGP soft reconfiguration.
updates Enter the keyword updates to view BGP updates.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048ON and S4048ON.
9.7(0.0) Introduced on the S6000ON.
9.0.2.0 Introduced on the S6000.
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
To view information on both incoming and outgoing routes, do not include the in and out parameters in
the debugging command. The in and out parameters cancel each other; for example, if you enter the
debug ip bgp in command and then enter the debug ip bgp out command, you do not see
information on the incoming routes.
Entering a no debug ip bgp command removes all configured debug commands for BGP.
Related
Commands
debug ip bgp events views information about BGP events.
debug ip bgp keepalives views information about BGP keepalives.
debug ip bgp notifications views information about BGP notifications.
debug ip bgp updates views information about BGP updates.
show debugging views enabled debugging operations.
340 Border Gateway Protocol