Users Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

321

322

323

324

325

326

327

328

329

330

Command Modes ROUTER BGP

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

7.7.1.0 Introduced on the C-Series.

Usage

Information

In Non-Deterministic mode, paths are compared in the order in which they arrive. This method can lead

the system to choose different best paths from a set of paths, depending on the order in which they are

received from the neighbors because MED may or may not get compared between adjacent paths. In

Deterministic mode (no bgp non-deterministic-med), the system compares MED between

adjacent paths within an AS group because all paths in the AS group are from the same AS.

When you change the path selection from Deterministic to Non-Deterministic, the path selection for the

existing paths remains Deterministic until you enter the clear ip bgp command to clear existing

paths.

bgp recursive-bgp-next-hop

Enable next-hop resolution through other routes learned by BGP.

C9000 Series

Syntax