Users Guide

AnyEmployeeCustomerElevenGrantedAccess
Vlan Members :
2-10,99
Group Name :
HostGroup
Egress IP Acl :
Group5
Vlan Members :
1,1000
show cam-acl-vlan
Display the number of FP blocks of CAM that are allocated for different ACL VLAN services, including ACL VLAN optimization,
VLAN iSCSI counters, and Open Flow.
C9000 Series
Syntax
show cam-acl-vlan
Command Modes EXEC Privilege
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
9.3(0.0) Introduced on the S4810, S4820T, Z9000 and MXL.
Usage
Information
After you allocate FP blocks of CAM to ACL VLAN operation, you must reboot the switch to enable ACL
VLAN optimization.
The following table describes the output fields of the show cam-acl-vlan command:
Table 1. show cam-acl-vlan Command Description
Field Description
Chassis Vlan Cam ACL Details about the CAM blocks allocated for ACLs
for various VLAN operations at a system-wide,
global level.
Stack Unit <number> Details about the CAM blocks allocated for ACLs
for various VLAN operations for a particular stack
unit.
Current Settings(in block sizes) Information about the number of FP blocks that
are currently in use or allocated.
VlanOpenFlow Number of FP blocks for VLAN open flow
operations.
VlanIscsi Number of FP blocks for VLAN internet small
computer system interface (iSCSI) counters.
VlanHp Number of FP blocks for VLAN high performance
processes.
VlanFcoe Number of FP blocks for VLAN Fiber Channel
over Ethernet (FCoE) operations.
VlanAclOpt Number of FP blocks for ACL VLAN optimzation
feature.
250 Access Control Lists (ACL)