Users Guide

Related
Commands
deny — configures a filter to drop packets.
permit — configures a filter to forward packets.
show ip access-lists
Display inbound or outbound IP access-list information based on a given option.
C9000 Series
Syntax
show ip access-lists {interface interface [in | out]}
Parameters
interface Enter the keyword interface then one of the following keywords and slot/port
or pe-id / stack-unit / port-id information:
● For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet then
the slot/port information.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
● For a VLAN interface, enter the keyword vlan then the slot/port number.
● For a Port Channel interface, enter the keyword port-channel then a port
channel number.
● For a port extender Gigabit Ethernet interface, enter the keyword peGigE then
the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255;
the stack-unit unit-number range is from 0 to 7; and the port-id range is from 1
to 48.
in Enter the keyword in to display information for an ip ingress or inbound access-list
attached to an interface.
out Enter the keyword out to display information for an ip egress or outbound access-
list attached to an interface.
Defaults None
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage
Information
If you do not attach an ingress or egress access-list to an interface, no information displays and you
return to the DELL# prompt.
Example
Dell# show ip access-lists out
Standard Egress IP access list first
seq 5 permit any count bytes (0 bytes)
seq 10 deny any count (0 packets)
Standard Egress IP access list five
seq 5 permit any
Standard Egress IP access list four
seq 5 permit any count bytes (0 bytes)
seq 10 deny any count (0 packets)
Standard Egress IP access list second
seq 5 permit host 1.1.1.1 count bytes (0 bytes)
Access Control Lists (ACL) 223