Users Guide

============================================
Card BootFlash Current Version New Version
---------------------------------------------------------------------
rpm 0 (CP) Boot Flash 3.3.1.15 3.3.1.15
rpm 0 (RP) Boot Flash 3.3.1.15 3.3.1.15
Linecard10 Boot Flash 3.3.1.15 3.3.1.15
***********************************************************************
* Warning - Upgrading boot flash is inherently risky and should only *
* be attempted when necessary. A failure at this upgrade may cause *
* a board RMA. Proceed with caution ! *
***********************************************************************
Proceed Boot Flash image for all cards [yes/no]: no
Example
(upgrade
bootselector-
image all booted)
Dell#upgrade bootselector-image all booted
Current Boot information in the system:
===========================================
Card BootSelector Current Version New Version
--------------------------------------------------------------------
rpm 0 (CP) Boot Selector 3.3.0.0c 3.3.0.0f
rpm 0 (RP) Boot Selector 3.3.0.0c 3.3.0.0f
Linecard10 Boot Selector 3.3.0.0c 3.3.0.0f
***********************************************************************
* Warning - Upgrading boot selectors is inherently risky and should *
* only be attempted when necessary. A failure at this upgrade may *
* cause a board RMA. Proceed with caution ! *
***********************************************************************
Proceed Boot Selector image for all cards [yes/no]: no
verify
Validate the software image on the flash drive after the image has been transferred to the system, but before the image has
been installed.
C9000 Series
Syntax
verify { md5 | sha256 }[ flash:// ] img-file [hash-value]
Parameters
md5 Enter the md5 keyword to use the MD5 message-digest algorithm.
sha256
Enter the sha256 keyword to use the SHA256 Secure Hash Algorithm
flash:// (Optional). Enter the flash:// keyword. The default is to use the flash drive. You
can just enter the image file name.
img-file Enter the name the Dell Networking software image file to validate.
hash-value (Optional). Enter the relevant hash published on i-Support.
Default flash drive
Command Modes EXEC mode
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
File Management 185