Users Guide

Ma 11/0,
Nu 0,
Vl 1
test1 1 Te 0/14,16-17
test2 2 Te 0/15
management 64
Dell#show ip vrf test1
VRF-Name VRF-ID Interfaces
test1 1 Te 0/14,16-17
show run vrf
Displays configuration information corresponding to all the VRFs in the system.
C9000 Series
Syntax
show run vrf vrf-name
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF..
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Usage
Information
Use this command to display information from the running-config corresponding to either a specific VRF
or all the VRFs in the system.
Example
Dell#show run vrf test3
!
ip vrf test3
description "IT Department"
1694 Virtual Routing and Forwarding (VRF)