Users Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1691

static Enter the keyword static to leak or share static routes corresponding to the VRF.

Command Modes ROUTE MAP MODE

Command

History

Version Description

9.9(0.0) Introduced on the C9010.

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.

Usage

Information

You can specify the matching criteria only after defining a route-map. Before using this command, you

must enter the route map mode using the route-map route-map-name command. The match criteria that

you specify is associated with the route-map that you define.

The export-target and import-target support only the match protocol and match prefix-list options. Other

options that are configured in the route-maps are ignored.

Commands

ipv6 route-import – imports IPv6 routes from another VRF.

redistribute

Redistribute leaked or exported routes corresponding to specific protocols.

C9000 Series

Syntax

redistribute {imported-bgp | import-ospf | import-isis}

Parameters

imported-bgp Enter the keyword imported-bgp to redistribute leaked routes that are learnt using

the BGP protocol.

imported-ospf Enter the keyword imported-ospf to redistribute leaked routes that are learnt using

the OSPF protocol.

imported-isis Enter the keyword imported-isis to redistribute leaked routes that are learnt using

the ISIS protocol.

route-map Enter the name of the route-map to specify the filtering criteria for imported

routes.

Command Modes

CONFIGURATION