Users Guide

server-name Enter the name of the remote SupportAssist Server. To include a space, enter a
space within double quotes.
Defaults Default server has URL stor.g3.ph.dell.com
Command Modes SUPPORTASSIST
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
The server-name is used as a reference only and is not required to be used as part of a URL definition.
There is a reserved name of default for the default server at stor.g3.ph.dell.com. You can customize
the defaults for this server by entering the server default command and use the custom commands.
You can configure one additional server.
SupportAssist Activity Commands
Dell Networking OS supports the following SupportAssist Activity mode commands.
action-manifest get
Copy an action-manifest file for an activity to the system.
Syntax
action-manifest get tftp | ftp | flash <file-specification> <local-file-
name>
Parameters
file-specification
Enter the full file specification for the action-manifest file. For example:
● tftp://hostip/filepath
● ftp://userid:password@hostip/filepath
● scp://userid:password@hostip/filepath
local-file-name Enter the name of the local action-manifest file, up to 32 characters long. Allowable
characters are: a to z, A to Z, 0 to 9, -, _, and space.
Command Modes SUPPORTASSIST ACTIVITY
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
The remote file specification includes the protocol that is used to copy the file from the remote system.
Related
Commands
● action-manifest install — configure the action-manifest to use for a specific activity.
● action-manifest show — view the list of action-manifest for a specific activity.
● action-manifest remove — remove the action-manifest file for an activity.
SupportAssist 1597