Users Guide

+DWEc3cgYAcU5Lai1MU2ODrzhCwyDNp05tKBU3t ReG1o8AxLi6+S4hyEMqHzkzBFNVqHzpQc
+Rs4p2urzV0F4pRKnaXdHf3Lk4D460HZRhhVrxqeNxPDpEn WIMPJi0ds= ashwani@poclab4
NOTE: For rhostfile and pub-key-file, the administrator must FTP the file to the chassis.
Example
Dell#conf
Dell(conf)# ip ssh pub-key-file flash://knownhosts
Dell(conf)#
Related
Commands
show ip ssh client-pub-keys displays the client-public keys used for the host-based authentication.
ip ssh mac
Configure the list of MAC algorithms supported on both SSH client and SCP.
Syntax
ip ssh mac mac-list
Parameters
mac
mac-list
Enter the keyword mac then a space-delimited list of message authentication code
(MAC) algorithms supported by the SSH client. The following MAC algorithms are
available.
When FIPS mode is enabled:
hmac-sha2256
hmac-sha1
hmac-sha196
When FIPS mode is disabled:
hmac-sha2-256
hmac-sha1
hmac-sha196
hmac-md5
hmac-md5-96
Defaults
The default list of MAC algorithm is in the order as shown below:
When FIPS mode is enabled:
hmac-sha2256
hmac-sha1
hmac-sha196
When FIPS mode is disabled:
hmac-sha2-256
hmac-sha1
hmac-sha196
hmac-md5
hmac-md5-96
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100ON, S6000, S6000ON, S5000, S4810, S4820T, S3048
ON, S4048ON, MXL, C9010, S3100 series, and Z9100-ON.
1484 Security