Users Guide

Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Added support for FIPS mode on the S4810.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage
Information
The host keys are required for key-exchange by the SSH server. If the keys are not found when you
enable the server (ip ssh server enable), the keys are automatically generated.
This command requires user interaction and generates a prompt prior to overwriting any existing host
keys.
NOTE: Only a user with superuser permissions should generate host-keys.
Example
Dell#conf
Dell(conf)#crypto key generate rsa1
Enter key size <1024-2048>. Default<1024>: 1024
Host key already exists. Do you want to replace. [y/n] :y
Dell(conf)#
Related
Commands
ip ssh server — enables the SSH server.
show crypto — displays the SSH host public keys.
crypto key zeroize rsa
Removes the generated RSA host keys and zeroize the key storage location.
C9000 Series
Syntax
crypto key zeroize rsa
Defaults none
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Related
Commands
crypto key generate — Generate keys for SSH server
1476 Security