Users Guide

you re-configure them. To remove an encrypted password, use the no password
password command.
To keep unauthorized people from viewing passwords in the switch configuration file, use the service
password-encryption command. This command encrypts the clear-text passwords created for user
name passwords, authentication key passwords, the privileged command password, and console and
virtual terminal line access passwords.
To view passwords, use the show running-config command.
show privilege
View your access level.
C9000 Series
Syntax
show privilege
From a PE console, use show privilege to view the current privilege level.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Example
Dell#show privilege
Current privilege level is 15
Dell#
Example (PE
Console)
Dell#show privilege
Current privilege level is 15.
Related
Commands
privilege level (CONFIGURATION mode) — assigns access control to different command modes.
Security 1451