Users Guide

detail interface To view a policy map interface in detail, enter the keyword detail and optionally
one of the following keywords and slot/port or number information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 E-Series only: Added Trust IPv6 diffserv.
6.2.1.1 Introduced on the E-Series.
Example (IPv4)
Dell#show qos policy-map detail tengigabitethernet 1/1
Interface TenGigabitEthernet 1/1
Policy-map-input policy
Trust diffserv
Queue# Class-map-name Qos-policy-name
0 - q0
1 CM1q1
2 CM2q2
3 CM3q3
4 CM4q4
5 CM5q5
6 CM6q6
7 CM7q7
Dell#
Example (IPv6)
Dell# show qos policy-map detail tengigabitethernet 0/10
Interface TengigabitEthernet 0/10
Policy-map-input pmap1
Queue# Class-map-name Qos-policy-name
0 c0 q0
1 c1 q1
2 c2 q2
3 c3 q3
4 c4 q4
5 c5 -
6 c6 q6
Quality of Service (QoS) 1363