Users Guide

8 8
12 12
16 16
20 20
Dell#sh system linecard 6 fanout count
Fan out ports in linecard 6
Configured = 6
Present = 6
show tech-support
Display a collection of data from other show commands, necessary for Dell Networking technical support to troubleshoot switch
operation.
C9000 Series
Syntax
show tech-support [linecard slot-id | page | pe pe-id stack-unit unit-
number]
From a PE console, use show tech-support stack-unit unit-number page
Parameters
linecard slot-id Enter the slot ID of the line card for which you want to collect information for tech
support. The range of slot IDs is from 0 to 11. Enter linecard all to collect
troubleshooting information on all line cards.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the
SPACE BAR to view the next 24 lines. Press the ENTER key to view the next line
of text.
pe pe-id (OPTIONAL) Enter the keyword pe and the port extender(PE) ID. The PE ID range
is from 0 to 255.
NOTE: The pe option is only visible when the extended bridge feature is
enabled.
stack-unit unit-
number
Enter the keyword stack-unit and the unit number. The stack-unit range is from
0 to 7.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9 (0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced save to the file options.
7.6.1.0 Introduced on the S-Series.
Usage
Information
Without the page or linecard option, the command output is continuous. To interrupt the command
output, use Ctrl-z.
132 Control and Monitoring