Users Guide

show crypto ipsec sa ipv6
Display the IPsec security associations (SAs) used on OSPFv3 interfaces.
C9000 Series
Syntax
show crypto ipsec sa ipv6 [interface interface]
Parameters
interface
interface
(OPTIONAL) Displays information about the SAs used on a specified OSPFv3
interface, where interface is one of the following values:
● For a Port Channel interface, enter port-channel number.
● For a 10-Gigabit Ethernet interface, enter TenGigabitEthernet slot/
port.
● For a 40–Gigabit Ethernet interface, enter fortyGigE slot/port.
● For a VLAN interface, enter vlan vlan-id. The valid VLAN IDs range is from
1 to 4094.
Defaults None.
Command Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
8.4.2.0 Introduced on the E-Series TeraScale.
8.3.19.0 Introduced on the S4820T.
Usage
Information
The show crypto ipsec sa ipv6 command output displays security associations set up for
OSPFv3 links in IPsec authentication and encryption policies on the router.
Example
Table 5. show crypto ipsec sa ipv6 Command Description
Field Description
Interface
IPv6 interface.
Link local address
IPv6 address of interface
IPSecv6 policy name
Name of the IPsec security policy applied to the
interface.
inbound/outbound ah
Authentication policy applied to inbound or
outbound traffic.
inbound/outbound esp
Encryption policy applied to inbound or outbound
traffic.
spi
Security policy index number used to identify the
policy.
inbound/outbound esp
Encryption policy applied to inbound or outbound
traffic.
Open Shortest Path First (OSPFv2 and OSPFv3) 1191