Users Guide

Unsuccessful login attempt(s) since the last successful login: 0
Unsuccessful login attempt(s) in last 30 day(s): 0
Successful login attempt(s) in last 30 day(s): 1
------------------------------------------------------------------
The following is sample output of the show login statistics unsuccessful-attempts
command.
Dell#show login statistics unsuccessful-attempts
There were 3 unsuccessful login attempt(s) for user admin in last 30
day(s).
The following is sample output of the show login statistics unsuccessful-attempts
time-period days command.
Dell# show login statistics unsuccessful-attempts time-period 15
There were 0 unsuccessful login attempt(s) for user admin in last 15
day(s).
The following is sample output of the show login statistics unsuccessful-attempts user
login-id command.
Dell# show login statistics unsuccessful-attempts user admin
There were 3 unsuccessful login attempt(s) for user admin in last 12
day(s).
The following is sample output of the show login statistics successful-attempts
command.
Dell#show login statistics successful-attempts
There were 4 successful login attempt(s) for user admin in last 30
day(s).
Related
Commands
● login statistics — enable and configure user login statistics on console and virtual terminal lines.
● login concurrent-session — configures the limit of concurrent sessions for all users on console and
virtual terminal lines.
show memory
View current memory usage on the system.
C9000 Series
Syntax
show memory [cp | lp {slot-id | pe [pe-id stack-unit unit-number] | rp}]
Parameters
cp Enter the keyword cp to display memory usage on the Control Processor CPU.
rp Enter the keyword rp to display memory usage on the Route Processor CPU.
lp slot-id Enter the slot ID of the line card for which you want to display memory usage. The
slot ID range is from 0 to 11.
pe pe-id Enter the keyword pe then the port extender (PE) ID to display memory usage on
the PE. The PE ID range is from 0 to 255.
NOTE: The pe option is only available when the extended bridge feature is
enabled.
stack-unit unit-
number
Enter the keyword stack-unit then the stack unit number. Range is from 0 to 7.
Control and Monitoring 111