Users Guide

router-lifetime
Set the router lifetime.
C9000 Series
Syntax
router—lifetime value
Parameters
value Enter the router lifetime in seconds. The range is from 0 to 9,000 seconds.
Defaults none
Command Modes POLICY LIST CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
router-preference maximum
Enable the verification of the advertised default router preference (DRP) value. The preference value is lower than or equal to
the specified limit. If this command is not configured, the verification process is bypassed.
C9000 Series
Syntax
router-preference maximum {high | low | medium}
To reset the default router preference value, use the no router-preference maximum {high |
low | medium} command.
Parameters
high Enter the keyword high to set the DRP value as high.
low Enter the keyword low to set the DRP value as low.
medium Enter the keyword medium to set the DRP value as medium.
Defaults none
Command Modes POLICY LIST CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
1082 Neighbor Discovery Protocol (NDP)