Users Guide

Parameters
value Enter the advertised reachability time in milliseconds. The range is from 0 to
3,600,000 milliseconds.
Defaults none
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
retrans-time
Enable the verification of the configured retransmission timer value in the received RA packets.
C9000 Series
Syntax
retrans—timer value
To reset the advertised retransmission interval, use the no retrans-timervalue command.
Parameters
value Enter the advertised retransmission time interval in milliseconds. The range is from
100 to 4,294,967,295 milliseconds.
Defaults none
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
Neighbor Discovery Protocol (NDP) 1081