Users Guide

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
other-config-flag
Enable the verification of the advertised other configuration parameter. If this command is not configured, the verification
process is bypassed.
C9000 Series
Syntax
other-config-flag {on | off}
To reset the other configuration parameter, use the no other-config-flag {on | off}
command.
Parameters
on Enter the keyword on to set the other-config-flag value as ON.
off Enter the keyword off to set the other-config flag value as OFF.
Defaults none
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
reachable-time
Enable the verification of the configured reachability time in the received RA packets.
C9000 Series
Syntax
reachable—time value
To reset the advertised reachability time, use the no reachable-timevalue command.
1080 Neighbor Discovery Protocol (NDP)