Users Guide

* - Management Unit
Example (PE
Console)
Dell#show inventory
System Type : C1048P
System Mode : 1.0
Software Version : 1-0(0-4092)
Unit Type Serial Number Part Number Rev Piece Part ID Rev Svc
Tag Exprs Svc Code
---- -------- ------------- ----------- ---- ------------------------ ----
------- --------------
* 1 C1048P-01-1G-48 NA 7590009701 001 US-0F14T0-77951-3AG-000A 01
NA NA
1 C1048P-PWR-AC NA 001ABCD001 00A US-001YHN-17972-38N-007A 001
NA NA
1 C1048P-FAN N/A N/A N/
A N/A
* - Management Unit
Software Protocol Configured
---------------------------
LLDP
Related
Commands
● show interfaces — displays the interface configuration.
● show interfaces transceiver — displays the physical status and operational status of an installed
transceiver. The output also displays the transceiver’s serial number.
show linecard
Display the linecard(s) status.
C9000 Series
Syntax
show linecard [slot-id [brief] | all]
Parameters
slot-id (OPTIONAL) Enter a slot ID to view information on the line card in that slot. For
the C9010, the range is from 0 to 11. For the C-Series, the range is 0 to 7. For the
E-Series, the range is 0 to 13 on the E1200, 0 to 6 on the E600, and 0 to 5 on the
E300.
all (OPTIONAL) Enter the keyword all to view a table with information on all present
line cards
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of line card
information.
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
106 Control and Monitoring