Users Guide

Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.2.(0.0) Introduced on the Z9000 and S4810.
show running-config lldp
Display the current global LLDP configuration.
C9000 Series
Syntax
show running-config lldp
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S8420T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Example
Dell#show running-config lldp
!
protocol lldp
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description
hello 15
multiplier 3
no disable
Dell#
LLDP-MED Commands
The following are the LLDP-MED (Media Endpoint Discovery) commands.
The Dell Networking OS LLDP-MED commands are an extension of the set of LLDP TLV advertisement commands. The C-
Series and S-Series support all commands.
The E-Series generally supports the commands. However, LLDP-MED commands are more useful on the C-Series and the S50V
model of the S-Series, because they support Power over Ethernet (PoE) devices.
1030
Link Layer Discovery Protocol (LLDP)