Users Guide

thermal-sensors Enter the keyword thermal-sensors to display only temperatures and
thresholds for the system and switching core, and port modules.
Default Display status information on all system components.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.8.1.0 The output of the show environment fan command for the S-Series is
changed to display fan speeds instead of showing the fan status as up or down.
Usage
Information
The following examples show the output of the show environment command.
Example (all)
show environment pe 4
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
-----------------------------------------------------
0 0 up up 9056 up 9056
Speed in RPM
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
-------------------------------------------------------
0 0 up AC NA NA
0 1 up DC NA NA
-- Unit Environment Status --
Unit Status Temp Voltage
--------------------------------------------
* 0 online 35C ok
* Management Unit
-- Thermal Sensor Readings (deg C) --
Unit Sensor0 Sensor1 Sensor2
----------------------------------
0 34 26 38
Dell#show environment pem
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm) Power Usage (W)
----------------------------------------------------------------
0 0 down AC up 1376 0.0
Control and Monitoring
103