Users Guide

advertise dot3-tlv
Configure the system or an interface to advertise IEEE 802.3at extended power-via-mdi.
C9000 Series
Syntax
advertise dot3-tlv power-via-mdi
To remove the advertised dot3–tlv, use the no advertise dot3–tlv power-via-mdi command
Parameters
power-via-mdi Enter the keyword power—via-mdi to advertise IEEE 802.3at power-via-mdi
TLV.
Defaults Disabled
Command Modes
● LLDP CONFIGURATION (conf-lldp)
● INTERFACE LLDP CONFIGURATION (conf-if-interface-lldp)
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage
Information
The advertise dot3–tlv power—via—mdi command enables the system to advertise IEEE 802.3at
power-via-mdi TLV to advertise its power negotiation capabilities with the powered devices via Link Layer
Discovery Protocol (LLDP). You can configure this command either on a specific interface or globally.
Example
Dell(conf)#interface peGigE 0/0/0
Dell(conf-if-pegi-0/0/0)#protocol lldp
Dell(conf-if-pegi-0/0/0-lldp)#advertise dot3-tlv power-via-mdi
Dell(conf-if-pegi-0/0/0-lldp)#
advertise management-tlv
Advertise management TLVs (Type, Length, Value).
C9000 Series
Syntax
advertise management-tlv {management-address | system-capabilities |
system-description | system-name}
To remove advertised management TLVs, use the no advertise management-tlv
{management-address | system-capabilities | system-description | system-
name} command.
Parameters
management-
address
Enter the keyword management-address to advertise the management IP address
TLVs to the LLDP peer.
system-
capabilities
Enter the keywords system-capabilities to advertise the system capabilities
TLVs to the LLDP peer.
system-
description
Enter the keywords system-description to advertise the system description
TLVs to the LLDP peer.
system-name Enter the keywords system-name to advertise the system name TLVs to the
LLDP peer.
1016 Link Layer Discovery Protocol (LLDP)