Concept Guide

Example of Writing the Value of a Managed Object
> snmpset -v 2c -c mycommunity 10.11.131.161 sysName.0 s "R5"
SNMPv2-MIB::sysName.0 = STRING: R5
Conguring Contact and Location Information using
SNMP
You may congure system contact and location information from the Dell Networking system or from the management station using
SNMP.
To congure system contact and location information from the Dell Networking system and from the management station using SNMP, use
the following commands.
• (From a Dell Networking system) Identify the system manager along with this person’s contact information (for example, an email
address or phone number).
CONFIGURATION mode
snmp-server contact text
You may use up to 55 characters.
The default is None.
• (From a Dell Networking system) Identify the physical location of the system (for example, San Jose, 350 Holger Way, 1st oor lab, rack
A1-1).
CONFIGURATION mode
snmp-server location text
You may use up to 55 characters.
The default is None.
• (From a management station) Identify the system manager along with this person’s contact information (for example, an email address
or phone number).
CONFIGURATION mode
snmpset -v version -c community agent-ip sysContact.0 s “contact-info”
You may use up to 55 characters.
The default is None.
• (From a management station) Identify the physical location of the system (for example, San Jose, 350 Holger Way, 1st oor lab, rack
A1-1).
CONFIGURATION mode
snmpset -v version -c community agent-ip sysLocation.0 s “location-info”
You may use up to 55 characters.
The default is None.
Simple Network Management Protocol (SNMP)
985