Command Line Reference Guide

1460 | Time and Network Time Protocol (NTP)
www.dell.com | support.dell.com
Related
Commands
Table 59-2. show ntp status Command Example Information
Field Description
“Clock is...” States whether or not the switch clock is synchronized,
which NTP stratum the system is assigned and the IP
address of the NTP peer.
“frequency is...” Displays the frequency (in ppm), stability (in ppm) and
precision (in Hertz) of the clock in this system.
“reference time is...” Displays the reference time stamp.
“clock offset is...” Displays the system offset to the synchronized peer and
the time delay on the path to the NTP root clock.
“root dispersion is...” Displays the root and path dispersion.
“peer mode is...” State what NTP mode the switch is. This should be
client mode.
show ntp associations Display information on NTP master and peer configurations.