Command Line Reference Guide

1458 | Time and Network Time Protocol (NTP)
www.dell.com | support.dell.com
Example
Figure 59-5. show clock detail Command Example
Related
Commands
show ntp associations
c e s
Display the NTP master and peers.
Syntax
show ntp associations
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 59-6. show ntp associations Command Example
FTOS#show clock detail
12:18:10.691 UTC Wed Jan 7 2009
Time source is RTC hardware
Summer time starts 02:00:00 UTC Sun Mar 8 2009
Summer time ends 02:00:00 ABC Sun Nov 1 2009
FTOS#
clock summer-time recurring Display the time and date from the switch hardware clock.
show calendar Display the time and date from the switch hardware clock.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
FTOS#show ntp associations
remote ref clock st when poll reach delay offset disp
==========================================================================
10.10.120.5 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
*172.16.1.33 127.127.1.0 11 6 16 377 -0.08 -1499.9 104.16
172.31.1.33 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
192.200.0.2 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
* master (synced), # master (unsynced), + selected, - candidate
FTOS#