Command Line Reference Guide

1174 | Private VLAN (PVLAN)
www.dell.com | support.dell.com
Figure 45-3. Output of show vlan private-vlan (primary)
Figure 45-4. Output of show vlan private-vlan (secondary)
The table, below, defines the fields in the output, above.
Related
Commands
show vlan private-vlan mapping
c s
Display primary-secondary VLAN mapping.
Syntax
show vlan private-vlan mapping
Defaults
none
Command Modes
EXEC
EXEC Privilege
Command
History
Table 45-2. show interfaces description Command Example Fields
Field Description
Primary Displays the VLAN ID of the designated or associated primary VLAN(s)
Secondary Displays the VLAN ID of the designated or associated secondary VLAN(s
Type Displays the type of VLAN in which the listed interfaces reside
Active States whether the interface is operationally up or down
Ports Displays the interface IDs in the listed VLAN.
FTOS# show vlan private-vlan 10
Primary Secondary Type Active Ports
------- --------- --------- ------ ------------------------
10 primary Yes Gi 2/1,3
1020 isolated Yes Gi 0/4
101 community Yes Gi 2/7-10
FTOS#show vlan private-vlan 102
Primary Secondary Type Active Ports
------- --------- --------- ------ ------------------------------------------
10 Primary Yes Po 1
Gi 0/2
102 Isolated Yes Gi 0/4
private-vlan mode Set the mode of the selected VLAN to either community or isolated.
show interfaces private-vlan Display type and status of PVLAN interfaces.
show vlan private-vlan mapping Display primary-secondary VLAN mapping.
switchport mode private-vlan Set the PVLAN mode of the selected port.
Version 7.8.1.0 Introduced on C-Series and S-Series