Command Line Reference Guide

1022 | Open Shortest Path First (OSPFv2 and OSPFv3)
www.dell.com | support.dell.com
default-information originate
c e s
Configure the FTOS to generate a default external route into an OSPF routing domain.
Syntax
default-information originate [always] [metric metric-value] [metric-type type-value]
[route-map map-name]
To return to the default values, enter no default-information originate.
Parameters
aut: States if OSPF authentication is configured. One of the following is listed:
• 0 - no authentication configured
• 1 - simple authentication configured using the ip ospf authentication-key command)
• 2 - MD5 authentication configured using the ip ospf message-digest-key command.
auk: If the ip ospf authentication-key command is configured, this field displays the key used.
keyid: If the ip ospf message-digest-key command is configured, this field displays the MD5 key
to: Displays the interface to which the packet is intended.
dst: Displays the destination IP address.
netmask: Displays the destination IP address mask.
pri: Displays the OSPF priority
N, MC, E, T Displays information available in the Options field of the HELLO packet:
• N + (N-bit is set)
• N - (N-bit is not set)
• MC+ (bit used by MOSPF is set and router is able to forward IP multicast packets)
• MC- (bit used by MOSPF is not set and router cannot forward IP multicast packets)
• E + (router is able to accept AS External LSAs)
• E - (router cannot accept AS External LSAs)
• T + (router can support TOS)
• T - (router cannot support TOS)
hi: Displays the amount of time configured for the HELLO interval.
di: Displays the amount of time configured for the DEAD interval.
dr: Displays the IP address of the designated router.
bdr: Displays the IP address of the Border Area Router.
Table 38-1. Output Descriptions for debug ip ospf process-id packet
Field Description
always (OPTIONAL) Enter the keyword always to specify that default route
information must always be advertised.
metric metric-value
(OPTIONAL) Enter the keyword metric followed by a number to configure a
metric value for the route.
Range: 1 to 16777214