Deployment Guide

86 | Control and Monitoring
www.dell.com | support.dell.com
Command
History
Usage
Information
This command clear alarms that are no longer active. If an alarm situation is still active, it is seen in the
system output.
clear command history
c e s
Clear the command history log.
Syntax
clear command history
Command Modes
EXEC Privilege
Command
History
Related
Commands
clear line
c e s
Reset a terminal line.
Syntax
clear line {line-number | aux 0 | console 0 | vty number}
Parameters
Command Modes
EXEC Privilege
Command
History
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
show command-history
Display a buffered log of all commands entered by all users along with a
time stamp.
line-number
Enter a number for one of the 12 terminal lines on the system.
Range: 0 to 11.
aux 0 Enter the keywords aux 0 to reset the Auxiliary port.
Note: This option is supported on E-Series only.
console 0 Enter the keyword console 0 to reset the Console port.
vty number
Enter the keyword vty followed by a number to clear a Terminal line.
Range: 0 to 9
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command