Deployment Guide

780 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
default-metric
c e
Allows you to change the metrics of redistributed routes to locally originated routes. Use this
command with the redistribute command.
Syntax
default-metric number
To return to the default setting, enter no default-metric.
Parameters
Defaults
0
Command Modes
ROUTER BGP
Command
History
Usage
Information
The default-metric command in BGP sets the value of the BGP MULTI_EXIT_DISC (MED) attribute
for redistributed routes only.
Related
Commands
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed
by the prefix length in the
/x format.
Range: /0 to /128
The
:: notation specifies successive hexadecimal fields of zeros.
peer-group
peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the name
of the peer group.
ipv6 unicast
[ipv6-address]
(OPTIONAL) Enter the keyword ipv6 unicast, and, optionally, an
ipv6 address.
in (OPTIONAL) Enter the keyword in to view only BGP updates received
from neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP updates sent to
neighbors.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
number
Enter a number as the metric to be assigned to routes from other protocols.
Range: 1 to 4294967295.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
bgp always-compare-med Enable comparison of all BGP MED attributes.
redistribute Redistribute routes from other routing protocols into BGP.