Deployment Guide

78 | BOOT_USER Mode
www.dell.com | support.dell.com
Related
Commands
show default-gateway
c es
Display the IP address configured for the default gateway.
Syntax
show default-gateway
Command Mode
BOOT_USER
Command
History
Example
Figure 4-8. show default-gateway Command Example
Related
Commands
show interface management ethernet
c es
Display the IP address configured for the Management interface.
Syntax
show interface management ethernet
Command Modes
BOOT_USER
Command
History
Example
Figure 4-9. show interface management ethernet Command Example
On the S-Series, the output of this command includes the MAC address and port number of the
assigned management port.
boot change
Change the primary, secondary or default boot image configuration.
boot zero Erase the configured primary, secondary, or default boot image parameters.
Version 7.8.1.0 Introduced on S-Series
BOOT_USER # show default-gateway
Gateway IP address: 10.1.1.1
BOOT_USER #
default-gateway
Configure the IP address for the default gateway.
interface management ethernet ip address
Assign an IP address to the Management Ethernet
interface.
Version 7.8.1.0 Introduced on S-Series
BOOT_USER # show interfaces management ethernet
Management ethernet IP address: 10.16.1.181/24
BOOT_USER #