Deployment Guide

BOOT_USER Mode | 77
Example
Figure 4-6. show bootflash Command Example
show bootvar
c es
Display boot configuration information.
Syntax
show bootvar
Command Modes
BOOT_USER
Command
History
Example
Figure 4-7. show bootvar Command Example
BOOT_USER # show bootflash
GENERAL BOOTFLASH INFO
======================
Bootflash Partition A:
Force10 Networks System Boot
Copyright 1999-2004 Force10 Networks, Inc.
ROM Header Version 1.0
Engineering CP_IMG_BOOT, BSP Release 2.0.0.19, Checksum 0x39303030
Created Mon Mar 20 10:56:53 US/Pacific 2004 by xxx on Unknown host
Bootflash Partition B:
Force10 Networks System Boot
Copyright 1999-2004 Force10 Networks, Inc.
ROM Header Version 1.0
Engineering CP_IMG_BOOT, BSP Release 2.0.0.19, Checksum 0x36313031
Created Mon Mar 6 18:15:10 2004 by xxx on hostname
Boot Selector Partition:
Force10 Networks System Boot
Copyright 1999-2004 Force10 Networks, Inc.
ROM Header Version 1.0
Official CP_IMG_BOOT_SELECTOR, BSP Release 2.0.0.15, Checksum 0x30314348
Created Mon Jan 21 17:15:47 US/Pacific 2004 by xxx on Unknown host
BOOT_USER #
Version 7.8.1.0 Introduced on S-Series
BOOT_USER # show bootvar
PRIMARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : ftp
file name : tt/latestlabel
Management Ethernet IP address : 10.16.1.181/24
Server IP address : 10.16.1.209
username : amsterdam
password : ******
SECONDARY OPERATING SYSTEM BOOT PARAMETERS:
==========================================
boot device : flash
file name : /E1200-3.1.1.3.bin
DEFAULT OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : flash
file name : /E1200-3.1.1.2.bin
BOOT_USER #