Deployment Guide

IPv6 Basics | 749
show ipv6 interface
c e s
Display the status of interfaces configured for IPv6.
Syntax
show ipv6 interface interface [brief] [configured] [gigabitethernet slot | slot/port] [linecard
slot-number] [loopback interface-number] [managementethernet slot/port] [port-channel
number] [tengigabitethernet slot | slot/port] [fortyGigE slot | slot/port] [vlan vlan-id]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
interface
(OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Loopback interface, enter the keyword
Loopback followed by a
number from 0 to 16383.
• For the Null interface, enter the keyword
null followed by zero (0).
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
brief
(OPTIONAL) View a summary of IPv6 interfaces.
configured
(OPTIONAL) View information on all IPv6 configured interfaces
gigabitethernet
(OPTIONAL) View information for an IPv6 gigabitethernet interface.
linecard slot-number
(OPTIONAL) View information for a specific IPv6 linecard or S-Series
stack-unit
Range: 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on a E300.
Range: 0-7 for C-Series
Range 0-7 for S-Series
managementethernet
slot/port
(OPTIONAL) View information on an IPv6 Management port. Enter the
slot number (0-1) and port number zero (0).
loopback
(OPTIONAL) View information for IPv6 loopback interfaces.
port-channel
(OPTIONAL) View information for IPv6 port channels.
tengigabitethernet
(OPTIONAL) View information for an IPv6 tengigabit ethernet interface.
fortyGigE
(OPTIONAL) View information for an IPv6 40-Gigabit ethernet interface.
vlan
(OPTIONAL) View information for IPv6 VLANs.
Version 8.4.6.0
Added support for the keyword
fortyGigE.
Version 8.4.2.1 Introduced on S-Series
Version 8.2.1.0 Introduced on E-Series ExaScale.
Support for the
managementethernet slot/port parameter was added.
Version 7.8.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series TeraScale