Deployment Guide

IPv4 Routing | 693
Command Modes
EXEC Privilege
Command
History
Example
FTOS#show ipv6 management-route
IPv6 Destination Gateway State
---------------- ------- -----
2001:34::0/64 ManagementEthernet 0/0 Connected
2001:68::0/64 2001:34::16 Active
FTOS#
show ip protocols
c e s
View information on all routing protocols enabled and active on the switch.
Syntax
show ip protocols
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 24-19. show ip protocols Command Example
summary Enter the keyword summary to view a table listing the number of active and
non-active routes and their sources.
static Enter the keyword static to view non-active routes also.
Version 8.4.1.0 Introduced
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Regular evaluation optimization enabled/disabled added to display output
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
preVersion 6.1.1.0 Introduced for E-Series
FTOS#show ip protocols
Routing Protocol is "bgp 1"
Cluster Id is set to 20.20.20.3
Router Id is set to 20.20.20.3
Fast-external-fallover enabled
Regular expression evaluation optimization enabled
Capable of ROUTE_REFRESH
For Address Family IPv4 Unicast
BGP table version is 0, main routing table version 0
Distance: external 20 internal 200 local 200
Neighbor(s):
Address : 20.20.20.2
Filter-list in : foo
Route-map in : foo
Weight : 0
Address : 5::6
Weight : 0
FTOS#