Deployment Guide

618 | Interfaces
www.dell.com | support.dell.com
show interfaces linecard
c e
Display information on all interfaces on a specific line card.
Syntax
show interfaces linecard slot-number
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
The following figure shows a line card that has an XFP interface. The type, medium, wavelength, and
receive power details are displayed. When a device that is not certified by Dell Networking is inserted,
it might work, but its details might not be readable by Dell Networking OS and not displayed here.
Example
Figure 23-35. show interfaces linecard Command Example (in C7004/C150)
Related
Commands
slot-number
Enter a number for the line card slot.
C-Series Range: 0-7 for C7008/C300; 0–3 for C7004/C150
E-Series Range: 0 to 13 on the E1200/1200i, 0 to 6 on the E600/600i, 0 to 5 on the
E300
Version 8.1.1.2 Introduced support on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
FTOS#show interfaces linecard 0
TenGigabitEthernet 0/0 is down, line protocol is down
Hardware is Force10Eth, address is 00:01:e8:51:b2:d4
Current address is 00:01:e8:51:b2:d4
Pluggable media present, XFP type is 10GBASE-SR
Medium is MultiRate, Wavelength is 850.00nm
XFP receive power reading is -2.3538
Interface index is 33883138
Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed 10000 Mbit
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 20:16:29
Queueing strategy: fifo
Input Statistics:
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
0 packets, 0 bytes, 0 underruns
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
--More--
show interfaces Display information on a specific physical interface or virtual interface.