Deployment Guide

File Management | 61
Defaults
None.
Command Mode
EXEC Privilege
Command
History
all Enter the keyword all to upgrade all RPM and linecard FPGAs. Enter the
keyword
all after the keyword rpm to upgrade all FPGAs on all RPMs.
Enter the keyword
all after the keyword linecard to upgrade all FPGAs
on all linecards.
system-fpga (OPTIONAL) Enter system-fpga to upgrade only the system FPGA on a
fiber linecard. Contact the Dell Networking TAC before using this
keyword.
link-fpga (OPTIONAL) Enter link-fpga to upgrade only the link FPGA on a fiber
linecard. Contact the Dell Networking TAC before using this keyword.
booted
Upgrade the FPGA image using the currently running Dell Networking OS
image.
file-url
Enter the following location keywords and information to upgrade the
FPGA using an Dell Networking OS image other than the one currently
running:
• To specify an Dell Networking OS image on the internal flash, enter
flash:// file-path/filename.
• To specify an Dell Networking OS image on an FTP server, enter
ftp:/
/user:password@hostip/filepath
• To specify an Dell Networking OS image on the external flash on the
primary RPM,
slot0://file-path/filename
• To copy a file on a TFTP server, enter tftp://hostip/filepath/
filename
Version 7.7.1.0
Renamed the
primary-fpga-flash keyword to fpga-image. Added support for
upgrading using a remote Dell Networking OS image.
Version 7.6.1.0
Added support for the all keyword
Version 7.5.1.0 Introduced on C-Series