Deployment Guide

Interfaces | 577
\
23
Interfaces
Overview
This chapter defines interface commands and is divided into the following sections:
• Basic Interface Commands
• Port Channel Commands
• Time Domain Reflectometer (TDR)
• UDP Broadcast
The symbols c e s under command headings indicate which Dell Networking platforms —
C-Series, E-Series, or S-Series, respectively — support the command.
Although all interfaces are supported on E-Series ExaScale, some interface functionality is supported
on E-Series ExaScale ex with Dell Networking OS 8.2.1.0. and later. When this is the case that is noted
in the command history.
Basic Interface Commands
The following commands are for physical, Loopback, and Null interfaces:
• clear counters
• clear dampening
• cx4-cable-length
• dampening
• description
• disable-on-sfm-failure
• duplex (Management)
• duplex (10/100 Interfaces)
• flowcontrol
• interface
• interface loopback
• interface ManagementEthernet
• interface null
• interface range
• interface range macro (define)
• interface range macro name
• interface vlan
• ipg (Gigabit Ethernet interfaces)