Deployment Guide

Border Gateway Protocol IPv4 (BGPv4) | 355
Command
History
description
c e s
Enter a description of the BGP routing protocol.
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
Defaults
No default behavior or values
Command Modes
ROUTER BGP
Command
History
Related
Commands
distance bgp
c e s
Configure three administrative distances for routes.
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, enter no distance bgp.
Parameters
Defaults
external-distance = 20; internal-distance = 200; local-distance = 200.
Command Modes
ROUTER BGP
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
description
Enter a description to identify the BGP protocol (80 characters maximum).
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
pre-7.7.1.0 Introduced
router bgp Enter ROUTER mode on the switch.
external-distance
Enter a number to assign to routes learned from a neighbor external to the AS.
Range: 1 to 255.
Default: 20
internal-distance
Enter a number to assign to routes learned from a router within the AS.
Range: 1 to 255.
Default: 200
local-distance
Enter a number to assign to routes learned from networks listed in the network
command.
Range: 1 to 255.
Default: 200