Deployment Guide

Border Gateway Protocol IPv4 (BGPv4) | 347
Defaults
None
Command Modes
EXEC Privilege
Related
Commands
Command
History
clear ip bgp dampening
c
Clear information on route dampening and return the suppressed route to the Active state.
Syntax
clear ip bgp [vrf vrf-name] dampening [ip-address mask]
Parameters
Defaults
None
Command Modes
EXEC Privilege
Usage
Information
After you enter this command, the software deletes the history routes and returns the suppressed routes
to the Active state.
The clear ip bgp dampening command does not clear the history paths.
Command
History
dampening Enter the keyword dampening to clear the flap dampening information.
flap-statistics Enter the keywords flap-statistics to clear the flap statistics information.
ipv4
Enter the ipv4 address family to clear.
ipv6
Enter the ipv6 address family to clear.
peer-group
Enter the peer-group to clear all members of the peer group.
bgp recursive-bgp-next-hop Disables next-hop resolution through other routes learned by the
BGP.
Version 8.4.7.0 Introduced support on C-Series.
Note: This command is supported only on the C-Series.
vrf vrf-name
(OPTIONAL) Enter the keyword vrf and then the name of the VRF to clear
information on route dampening corresponding to that VRF.
Note: You can use this attribute on a specific VRF to remove history routes
corresponding to that VRF. You can also use this attribute to return the
suppressed routes corresponding to a specific VRF to an active state.
ip-address mask
(OPTIONAL) Enter an IP address in dotted decimal format and the prefix mask in
slash format (/x) to clear dampening information only that BGP neighbor.
Version 8.4.7.0 Introduced support on C-Series.