Deployment Guide

282 | Access Control Lists (ACL)
www.dell.com | support.dell.com
match ip vlan
c
Uses a VLAN as the match criterion for an L3 class map.
Syntax
match ip vlan vlan-id
To remove VLAN as the match criterion, use the no match ip vlan vlan-id command.
Parameters
Defaults
None.
Command Modes
CONF-CLASS-MAP
Command
History
Usage
Information
To access this command, enter the class-map command. After the class map is identified, you can
configure the match criteria.
Use this command to match an IP class-map against a single VLAN ID.
Related
Commands
match ip vrf
c
Uses a VRF as the match criterion for an L3 class map.
Syntax
match ip vrf vrf-id
To remove VRF as the match criterion, use the no match ip vrf vrf-id command.
Parameters
Defaults
None.
Command Modes
CONF-CLASS-MAP
Command
History
Usage
Information
To access this command, enter the class-map command. After the class map is identified, you can
configure the match criteria.
Use this command to match an IP class-map against a single VRF ID.
Related
Commands
vlan vlan-id
Enter the keyword vlan and then the ID of the VLAN. The range is from 1 to
4094.
Version 8.4.7.0 Introduced on the C-Series.
class-map Create/access a class map.
vrf vrf-id
Enter the keyword vrf and then the ID of the VRF. The range is from 1 to 63.
Version 8.4.7.0 Introduced on the C-Series.
class-map Create/access a class map.