Deployment Guide

| 11
Example
show vlt role
c
Displays the VLT peer status, role of the local VLT switch, VLT system MAC address and system
priority, and the MAC address and priority of the local VLT device.
Syntax
show vlt role
Defaults
Not Configured.
Command Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant
Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Example
FTOS#show vlt mismatch
Domain
-----------
Parameters Local Peer
------------ ----------- ---------
Unit-ID 0 15
Vlan-config
------------
Vlan-ID Local Mode Peer Mode
--------- ------------ -----------
100 -- L3
Vlan IPV4 Multicast Status
---------------------------
Vlan-ID Local Status Peer Status
-------- ------------ -----------
4094 Active Inactive
FTOS#
Version 8.4.6.0 Introduced on the C-Series.
FTOS_VLTpeer1# show vlt role
VLT Role
----------
VLT Role: Primary
System MAC address: 00:01:e8:8a:df:bc
System Role Priority: 32768
Local System MAC address: 00:01:e8:8a:df:bc
Local System Role Priority: 32768
FTOS_VLTpeer2# show vlt role
VLT Role
----------
VLT Role: Secondary
System MAC address: 00:01:e8:8a:df:bc
System Role Priority: 32768
Local System MAC address: 00:01:e8:8a:df:e6
Local System Role Priority: 32768