Deployment Guide

SNMP and Syslog | 1401
snmp-server location
c e s
Configure the location of the SNMP server.
Syntax
snmp-server location text
To delete the SNMP location, enter no snmp-server location.
Parameters
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
snmp-server packetsize
c e s
Set the largest SNMP packet size permitted when the SNMP server is receiving a request or generating
a reply, use the snmp-server packetsize global configuration command.
Syntax
snmp-server packetsize byte-count
Parameters
Defaults
8
Command Modes
CONFIGURATION
Command
History
snmp-server trap-source
c e s
Configure a specific interface as the source for SNMP traffic.
Syntax
snmp-server trap-source interface
To disable sending traps out a specific interface, enter no snmp trap-source.
text
Enter an alpha-numeric text string, up to 55 characters long.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
byte-count
Enter one of the following values 8, 16, 24 or 32. Packet sizes are 8000 bytes, 16000 bytes,
32000 bytes, and 64000 bytes.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command