Deployment Guide

PIM-Dense Mode (PIM-DM) | 1121
40
PIM-Dense Mode (PIM-DM)
Overview
PIM-DM is supported on E-Series ExaScale e
x
in Dell Networking OS 8.1.1.0. and later.
PIM-DM is supported on E-Series TeraScale e
t
, C-Series c, and S-Series s platforms in Dell
Networking OS 8.4.2.0. and later.
For information on the commands required to configure and use PIM-Dense Mode (PIM-DM), refer to:
• IPv4 PIM Commands on page 1157
• IPv4 PIM-Dense Mode Commands
IPv4 PIM-Dense Mode Commands
The IPv4 PIM-Dense Mode (PIM-DM) commands are:
• ip pim dense-mode