Deployment Guide

1092 | Open Shortest Path First (OSPFv2 and OSPFv3)
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC Privilege
Command
History
Example
Figure 38-23. debug ipv6 ospf packet Command Example
interface
(OPTIONAL) Enter one of the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel
followed by a number:
C-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to
512 for ExaScale.
• For a SONET interface, enter the keyword
sonet followed by the slot/
port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
• For a VLAN, enter the keyword
vlan followed by a number from 1 to
4094
Version 8.4.6.0
Added support for the keyword
fortyGigE.
Version 7.8.1.0 Added support for C-Series
Version 7.4.1.0 Introduced
Table 38-15. debug ip ospf Output Fields
Field Description
OSPFv3... Debugging is on for all OSPFv3 packets and all interfaces
05:21:01 Displays the time stamp.
Sending Ver:3 Sending OSPF3 version.
Type: Displays the type of packet sent:
• 1 - Hello packet
• 2 - database description
• 3 - link state request
• 4 - link state update
• 5 - link state acknowledgement
Length: Displays the packet length.
FTOS#debug ipv6 ospf packet
OSPFv3 packet related debugging is on for all interfaces
05:21:01 : OSPFv3: Sending, Ver:3, Type:1(Hello), Len:40, Router
ID:223.255.255.254, Area ID:0, Inst:0, on Po 255
05:21:03 : OSPFv3: Received, Ver:3, Type:1(Hello), Len:40, Router
ID:223.255.255.255, Area ID:0, Chksum:a177, Inst:0, from Vl 100
05:20:25 : OSPFv3: Sending, Ver:3, Type:4(LS Update), Len:580, Router
ID:223.255.255.254, Area ID:0, Inst:0, on Vl 1000
FTOS#