Deployment Guide

1038 | Open Shortest Path First (OSPFv2 and OSPFv3)
www.dell.com | support.dell.com
To remove the OSPF description, use the no description command.
Parameters
Defaults
No default behavior or values
Command Modes
ROUTER OSPF
Command
History
Related
Commands
distance
c e s
Define an administrative distance for particular routes to a specific IP address.
Syntax
distance weight [ip-address mask access-list-name]
To delete the settings, use the no distance weight [ip-address mask access-list-name] command.
Parameters
Defaults
110
Command Modes
ROUTER OSPF
Command
History
description
Enter a text string description to identify the OSPF configuration (80 characters maximum).
Version 7.8.1.0 Introduced support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series
show ip ospf asbr Display VLAN configuration.
weight
Specify an administrative distance.
Range: 1 to 255.
Default: 110
ip-address
(OPTIONAL) Enter a router ID in the dotted decimal format.
If you enter a router ID, you must include the mask for that router address.
mask
(OPTIONAL) Enter a mask in dotted decimal format or /n format.
access-list-name
(OPTIONAL) Enter the name of an IP standard access list, up to 140 characters.
Version 7.8.1.0 Introduced support for Multi-Process OSPF.
Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series