Command Line Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 765
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
debug ip bgp notifications
c e
Allows you to view information about BGP notifications received from neighbors.
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name] notifications [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name]
notifications [in | out] command.
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
debug ip bgp updates
c e
Allows you to view information about BGP updates.
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name | ipv6 unicast [ipv6-address]]
updates [in | out | prefix-list prefix-list-name]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name |
ipv6 unicast [ipv6-address]] updates [in | out] command.
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed
by the prefix length in the
/x format.
Range: /0 to /128
The
:: notation specifies successive hexadecimal fields of zeros.
peer-group
peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the name
of the peer group.
in (OPTIONAL) Enter the keyword in to view BGP notifications received
from neighbors.
out (OPTIONAL) Enter the keyword out to view BGP notifications sent to
neighbors.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale