Command Line Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 763
Command Modes
EXEC Privilege
Command
History
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
debug ip bgp ipv6 dampening
c e
View information on IPv6 routes being dampened.
Syntax
debug ip bgp ipv6 unicast dampening [in | out]
To disable debugging, enter no debug ip bgp ipv6 unicast dampening.
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
Enter no debug ip bgp command to remove all configured debug commands for BGP.
Related
Commands
debug ip bgp ipv6 unicast soft-reconfiguration
c e
t
Enable soft-reconfiguration debugging for IPv6 unicast routes.
Syntax
debug ip bgp [ipv4-address | ipv6-address | peer-group-name] ipv6 unicast
soft-reconfiguration
To disable debugging, use the no debug ip bgp [ipv4-address | ipv6-address | peer-group-name]
ipv6 unicast soft-reconfiguration command.
in (OPTIONAL) Enter the keyword in to view only events on inbound
BGP messages.
out (OPTIONAL) Enter the keyword out to view only events on outbound
BGP messages.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
in (OPTIONAL) Enter the keyword in to view only inbound dampened routes.
out (OPTIONAL) Enter the keyword out to view only outbound dampened routes.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
show ip bgp ipv6 unicast
dampened-paths
View BGP dampened routes.