Command Line Reference Guide

736 | IPv6 Basics
www.dell.com | support.dell.com
Usage
Information
The Management port is enabled by default (no shutdown). If necessary, use the ipv6 address
command to assign an IPv6 address to the Management port.
Example
Figure 26-5. Command Example: show ipv6 interface
Figure 26-6. Command Example: show ipv6 interface managementethernet
FTOS#show ipv6 interface gigabitethernet 1/1
GigabitEthernet 1/1 is up, line protocol is up
IPV6 is enabled
Link Local address: fe80::201:e8ff:fe04:62c4
Global Unicast address(es):
2001::1, subnet is 2001::/64
2002::1, subnet is 2002::/120
2003::1, subnet is 2003::/120
2004::1, subnet is 2004::/32
Global Anycast address(es):
Joined Group address(es):
ff02::1
ff02::2
ff02::1:ff00:1
ff02::1:ff04:62c4
MTU is 1500
ICMP redirects are not sent
DAD is enabled: number of DAD attempts: 1
ND reachable time is 30 seconds
ND advertised reachable time is 30 seconds
ND advertised retransmit interval is 30 seconds
FTOS#show ipv6 interface managementethernet 0/0
ManagementEthernet 0/0 is up, line protocol is up
IPV6 is enabled
Link Local address: fe80::201:e8ff:fe0b:a94c
Global Unicast address(es):
Actual address is 2222::5, subnet is 2222::/64
Virtual-IP IPv6 address is not set
Global Anycast address(es):
Joined Group address(es):
ff02::1
ff02::2
ff02::1:ff00:5
ff02::1:ff0b:a94c
MTU is 1500
ICMP redirects are not sent
DAD is enabled, number of DAD attempts: 3
ND reachable time is 3600000 milliseconds
ND advertised reachable time is 3600000 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent every 200 to 600 seconds
ND router advertisements live for 9000 seconds