Command Line Reference Guide

44 | File Management
www.dell.com | support.dell.com
Related
Commands
show file
ces
Display contents of a text file in the local filesystem.
Syntax
show file filesystem
Parameters
Command Modes
EXEC Privilege
Command
History
Example
Command output example (Partial): show file
Related
Commands
boot config Set the location of configuration files on local devices.
boot host Set the location of configuration files from the remote host.
boot network Set the location of configuration files from a remote network.
boot system Set the location of Dell Networking OS image files.
boot system gateway Specify the IP address of the default next-hop gateway for the management subnet.
filesystem
Enter one of the following:
•
flash: for the internal Flash
•
slot0: for the external Flash
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
FTOS#show file flash://startup-config
!
boot system rpm0 primary ftp://test:server@10.16.1.144//home/images/
E1200_405-3.1.2b1.86.bin
boot system rpm0 secondary flash://FTOS-ED-6.1.1.0.bin
boot system rpm0 default ftp://:@/\
!
redundancy auto-synchronize persistent-data
redundancy primary rpm0
!
hostname E1200-20
!
enable password 7 94849d8482d5c3
!
username test password 7 93e1e7e2ef
!
enable restricted 7 948a9d848cd5c3
!
protocol spanning-tree 0
bridge-priority 8192
rapid-root-failover enable
!
interface GigabitEthernet 0/0
no ip address
shutdown
format (C-Series and E-Series)
Erase all existing files and reformat a filesystem on the E-Series or
C-Series platform.
format flash (S-Series)
Erase all existing files and reformat the filesystem in the internal
flash memory on and S-Series.
show file-systems
Display information about the file systems on the system.