Command Line Reference Guide

14 |
www.dell.com | support.dell.com
Syntax
show vlt statistics igmp-snoop
Defaults
Not Configured.
Command Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant
Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Example
system-mac
c
Reconfigure the default MAC address for the domain.
Syntax
system-mac mac-address
Parameters
Defaults
Not Configured.
Command Modes
VLT DOMAIN
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant
Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.4.6.0 Introduced on the C-Series.
FTOS_VLTpeer1#show vlt statistics igmp-snoop
VLT Igmp-Snooping Statistics
-----------------------------
IGMP Info Pkts sent: 4
IGMP Info Pkts Rcvd: 1
IGMP Reg Request sent: 1
IGMP Reg Request rcvd: 2
IGMP Reg Response sent: 1
IGMP Reg Response rcvd: 1
IGMP PDU Tunnel Pkt sent: 5
IGMP PDU Tunnel Pkt rcvd: 10
IGMP Tunnel PDUs sent: 10
IGMP Tunnel PDUs rcvd: 19
mac-address
Enter the system MAC address for the VLT domain.
Version 8.4.6.0 Introduced on the C-Series.